Micro-fusion Pressure Transmitter Pressure Sensor

time：2020-11-25 browse：second

< >

Model：

overview：

PT10SR-2511 pressure transmitter has the pressure chamber which is made of single complete stainless steel piece, and all-metal sealing structure. The transmitter uses micro-fusion technology and has specially designed structure. It adopts the overall digital calibration and temperature compensation This transmitter can meet the OEM customers' large volume demand and is highly cost efficient. It can be widely used in air pressure, hydraulic, and even worse media measuring environment, such as sewage, steam, light corrosive gases and liquids and other industrial or civil field pressure monitoring. Special customized products for users are also available.

main features
parameter
structure
selection
application

download

main features

No	Item	Data
1	Pressure Range	0kPa~700kPa…100MPa
2	Over pressure	2×FS(max.150MPa)
3	Burst pressure	5×FS(max.200MPa)
4	Power Supply	8V~28V DC or 5V DC
5	Output signal	4mA~20mA DC, 0.5V~4.5V DC
6	Accuracy	1.0 rating
7	Compensation temperature	-10℃~80℃
8	Working temperature	-40℃~125℃
9	Storage Temperature	-40℃~125℃
10	Medium compatibility	all mediums that are compatible with 17-4PH stainless steel

parameter

Pressure Range	-0.1MPa…0MPa~0.01MPa…160MPa(G) 0MPa~0.025MPa…60MPa(A)
Over-Pressure	200%FS(≤10MPa) 150%FS(Others)
Ultimate Pressure	400%FS(≤10MPa) 200%FS(Others)
Media	Liquid or Gas which is compatible with stainless steel
Power Supply	10~30V DC,24V DC suggested
Output Signal	4mA~20mA DC (2-wire)
Load	RL≤(U-10)/0.02 (Ω)
Accuracy	±0.25%FS、±0.5%FS
Temperature Coefficient	≤±0.03%FS/℃
Long-term stability	≤±0.5%FS/year
Environment temp.	-40℃ ~+80℃
Media temp.	-40℃ ~+150℃
Load	≤(U-11)/0.02 (Ω) (2-wire); ≥10k(3-wire); ≥10k(3-wire)
Relative Humidity	0~90%RH
Protection	IP65
Frequency Response	>1kHz
Insulation	100MΩ, 50VDC
Pressure port and housing	Stainless steel 1Cr18Ni9Ti
Electrical Connection	Hirschmann plug

structure

selection

No	Item	Data
1	Pressure Range	0kPa~700kPa…100MPa
2	Over pressure	2×FS(max.150MPa)
3	Burst pressure	5×FS(max.200MPa)
4	Power Supply	8V~28V DC or 5V DC
5	Output signal	4mA~20mA DC, 0.5V~4.5V DC
6	Accuracy	1.0 rating
7	Compensation temperature	-10℃~80℃
8	Working temperature	-40℃~125℃
9	Storage Temperature	-40℃~125℃
10	Medium compatibility	all mediums that are compatible with 17-4PH stainless steel

application

The transmitter is widely used for high and low temperature measurement and control of Food, Medicine, Power station,Machinery, Automobile,Shipbuilding, Petroleum, Chemical industry,Metallurgy, Steam and Heat exchanging, Aviation, Spaceflight, and Scientific research and Laboratory instrument, etc.

Last article：没有了 Next article：PT10SR-230 Pressure Transmitter