服务热线：
010-80598060
时间：2020-07-29 浏览：次
小面径轴向压力表主要用于调压阀、空气设备
●轴向安装结构
●铜内机、钢内机可选，G36无钢内机
●喷黑塑铁壳
●ZG1/4
●2.5% 精度等级
| 安装方式 | 轴向安装结构 |
| 内机 | 铜内机、钢内机可选，G36无钢内机 |
| 外壳 | 喷黑塑铁壳 |
| 连接螺纹 | ZG1/4 |
| 精度等级 | 2.50% |
| 型号代码 CODE | 特性说明 CHARACTERISTICS | |||||
| 基本型号 Basic type | P | 铜合金内机普通标准型Copper alloy intermnals, standard type | ||||
| PTY | 铜合金内机特殊用途标准型Copper aloy internals, spedal pupose standard type | |||||
| PTN | 铜合金内机充液耐震型Copper alloy intemnals, liquid filing, vibration-proof | |||||
| PTF | 不锈钢内机标准型Stainless Steel intemals, standard type | |||||
| PTFN | 不锈钢内机充液耐震型Stainless Steel intemals, lquid fling. wibration-proof | |||||
| 外径 Diameter | 040 | φ40mm | 050 | φ50mm | 036 | φ36mm |
| 041 | φ41mm | 051 | φ51mm | 044 | φ44mm | |
| 043 | φ43mm | 053 | φ53mm | 046 | φ46mm | |
| 安装方式 Mounting | AO | 径向直接安装Bottom mounting | ||||
| AT | 径向前边Bottom mounting with front flange | |||||
| ZO | 中轴向直接安装Back mounting | |||||
| ZT | 中轴向前边Back mounting with front flange | |||||
| ZK | 轴向卡子安装Back dlamp mounting | |||||
| 设计代码 Design | 105 | 塑料表壳压紧式Plastic case push in type | ||||
| 200 | 铁外壳、螺钉上紧式Iron case, fixed with screw | |||||
| 203 | 铁外壳旋压密封罩壳Stainless Steel case, Roll formed | |||||
| 204 | 铁外壳旋紧式lron case, Screw type | |||||
| 205 | 铁外壳压紧式lron case, Push in type | |||||
| 505 | 不锈钢外壳压紧式Stainless. Steel case Push in type | |||||
| 513 | 2件式钢外壳旋压密封式Two-piece type, Stainless Steel case, Roll formed | |||||
| 533 | 不锈钢焊壳旋压密封式Stainless Steel case welded, Roll formed | |||||
| 535 | 不锈钢焊壳压紧式Stainless Steel case welded. Push in type | |||||
| 量程 Ranges | M120 | 1MPa(其它规格详见量程代码表See rang table) | ||||
| 连接螺纹 Connection | M10 | M10×1 | G184 | G1/8 | Z14 | NPT1/4 |
| M14 | M14×1.5 | G14 | G1/4 | |||
| R18 | ZG1/8 | R14 | ZG1/4 | |||
| 备选项 Options | TPB | 特殊仪表盘面Special dial | BDA | 1级精度Accuracy 1% | ||
| PHD | 缓冲螺钉Buffer screw | FWP | 加不锈钢位号牌Stainless Steel label | |||
| SKA | 碳钢外壳Carbon steel case | SBB | 有机玻璃Organic glass | |||
| SKB | SUS304外壳Case | SYB | 充硅油Silicon filing | |||
小面径轴向压力表主要用于调压阀、空气设备
当前位置：
